Why You Should Trust Your Double Glazing Repairs to Local Experts
It's impossible to replace double glazing on your own, but a professional glass installer can make the task easy and safe. It's also worth checking with the company you purchased it from to determine if it's still under warranty.
Drilling holes in misted windows will let the condensation out but it's only a short-term fix. Double glass that has blown away has to be replaced to restore the thermal efficiency.
Broken window panes
If a window is broken, it leaves an opening in the double-glazing which can cause draughts or moisture. Not only are they uncomfortable but they could also cause damage to your property and health. Damp environments can cause damaged frames, structural issues and other costly repairs.
A damaged window is typically simple to repair if you are aware of the correct procedure. Wear eye protection and gloves to safeguard yourself. Then, take out the glass shards that were left. Once you have removed the shards, use a utility knife to cut through any glazing putty and metal glazing points. Once the glass is free, carefully remove it from the frame.
After you've cleaned and sanded your area to remove any paint or gunk, it's time to prepare the space to be ready for the glass. Measure the opening from top to bottom and from side to side. Subtract 1/8 inch to account for any expansion and contraction of the frame. This will ensure that the new glass is installed correctly.
Then, apply a cord of glaziers' compound to the outside edge of your glass-frame joint. Smooth it out with a putty blade, matching the colour of the frame. Once the compound is dry, you can paint the compound and the new pane to match the rest of the window.
To stop the crack from spreading, cut an arc with your utility knife, right beyond the area that is cracked. This will curtail the crack and stop it from spreading, saving your window pane without the need to replace it.
It can be difficult to repair your own home without the right tools. It's safer and simpler to find a company that specializes in repairs to local double glazing. This will not only spare you a lot of time and hassle, but it will also ensure that your double glazing is repaired professionally and to the highest standards.
Broken seals
A damaged seal can cause windows to lose their insulation properties, resulting in drafts and increased energy bills. It also allows humidity and moisture to enter the window panes, leading to condensation and fogging. Foggy windows can be difficult to endure, and the problem will only worsen over time when it is not dealt with.
You can stop the window seals from breaking by having your windows professionally installed and avoid power washing your windows. Even if your windows look good, you should have the seals replaced immediately if you notice any signs that the seal is broken, such as condensation on the glass or an increase in your energy costs.
Window seals are constructed of flexible materials that can become damaged over time. Older windows are more likely to experience this issue, as are windows that have been exposed to a lot of sunlight. Window seals can also fail if there are problems with the installation, such as gaps or frames that are uneven.
While it is possible to repair a broken window seal on your own, the process is complex and could damage other parts of the windows, like the argon gas that is inside the windows. It is recommended to contact an expert to look over your windows and fix any worn or damaged seals.
After the window seal has been replaced, your double glazing system will function just as it should. It will safeguard your home from unintentional heat loss and cold air infiltration. This will save you money on your heating and cooling bills while keeping your home comfortable.
In most cases, repairing an ineffective window seal is as simple as taking the window out of its sash, and then removing the old sealant. Once the window is clean and ready to be reinstalled then it is refilled with argon gas and sealed again. It is possible to complete the job yourself, but it is recommended to contact an expert to ensure that the job is done safely and correctly.
Broken door handles
The handle on the front door of your house is a vital part of your security. It allows you to open the door, and it also connects to a latch that is fitted into a slot within the door frame to keep the door shut. If double glazing repair feels loose, it can cause problems opening the door, and it could be a sign that there are problems with your locking mechanism, too.
Fortunately, fixing a broken door handle is relatively simple. In the majority of cases, you can tighten the screw that holds it in place. If the issue is more serious than that, you might require an entirely new handle.
To begin, you must wedge your door open using a wedge or stop so that it doesn't close when you work on the handle or knob. This will prevent it from damaging the paint and will also allow you access to all the parts of the handle or doorknob without worrying about the latch being engaged.
The next step is remove the cover plate on the door handle. This may look like a piece of plastic, either rectangular or round, that is designed to hide screws for a cleaner appearance. Some of them might have a small slot or detent that you can use a flathead screwdriver press down to let it go. After that, you'll need to pull the base of the handle off and expose the screws which hold it in place.
Most screws that hold your door handle or doorknob in place are hidden behind the cover plate. After you've removed the cover plate you'll be able to identify each one and tighten them as needed. Be careful not to tighten too much them, as this may harm the knob or handle. Once all of the screws are tight you can put the base back on and then place the knob or handle on top to line up with either the screw holes (if there are visible holes) or the detent hole. After that check the handle to confirm that it's functioning properly.
Scratches and Chips
Even the most well-maintained double glazing can be damaged. Cracks, chips, and dents are caused by stray balls or a sudden wind gust. These damage can have a negative effect on the performance of your doors and windows which will require replacement. It is essential to identify the signs of damage and to contact your installer as quickly as possible. It will help if you provide the details of the problem, as well as photos where relevant.
Depending on the extent of the chip or scratch depending on the severity of the chip or scratch, it might be possible to have them repaired without much hassle. If the scratch is deep enough that you can feel it with your fingernail, it may be best to contact a glazier to take it off. They can use glass polish to remove the scratch. They will also be able to provide you with some maintenance tips to keep your doors and windows in good condition.
Be on the lookout for signs that the gas cavity between your window panes is causing an air leak. If you notice condensation between the window panes, this could indicate that the inert gasses have evaporated and warm indoor air is now circulating through your home. It is important to contact your installer immediately if you observe this issue since it could be covered by your warranty.
If your double-glazed windows have a warranty then you'll be able to claim back any repair costs. You may also want to consider switching to a different company that can be trusted to provide superior quality products and top-quality customer service. Look up online reviews, verify the BBB or ask for references from previous customers to ensure that you choose a reliable and quality company. You should also inquire about certifications from major manufacturers as well as the Fenestration and Glazing Industry Alliance. This will help you stay clear of companies that are not authorized to install your double glazing.